PLN0.00
Looks like you haven't made up your mind yet...
Go to the store
Language:
Fischer winter gun mounting foam PUP750
Product index: 00014307
Price (with Tax.)
PLN16.90
14 days to return
Free shipping from 499 PLN
Ask a question +48 536 969 696
Product description
FISCHER 750 ml gun foam. It is a one-component sealing foam, curing under the influence of moisture. It is the highest quality foam used for sealing windows and window sills, filling voids, insulating passages and penetrations of pipes and cables.m The cured foam, applied at a certain depth and width of the gap, on surfaces made of durable mineral, such as concrete, corresponds to material class B1 according to DIN 4102. For other applications, it corresponds to material class B2. The foam also has an MPA-RFN certificate, a technical approval and an ITB certificate.
Method of use:
Clean the substrate from dust, dirt and grease. Strip the door frames before applying the foam. Protect the woodwork with foil or adhesive tape. Container temperature: 10°C to 35°C (optimally 20°C). Immediately before use, shake the container vigorously about 20-30 times. Screw the can onto the gun. Working position of the container - with the valve downwards. Moisten the substrate generously with water. Fill the gaps no wider than 5 cm at 50% of their depth - the foam increases in volume during curing. Fill the gaps wider than 5 cm gradually in layers, and moisten each layer with water. The foam flow can be adjusted by pressure on the trigger of the gun. After curing, remove excess foam mechanically, such as with a knife. It is best to use up the started package to the end. Fresh dirt from the foam can be removed with acetone. The cured foam should be protected and shielded with paint, plaster or other UV-protective materials. When finished, clean the gun with a polyurethane foam cleaner.
Product advantages:
- sealing and embedding of window , door frames, etc.
- filling gaps in the installation of joinery, ironwork.
- filling of clearances and furrows for pipes and installation wires in walls, ceilings , roofs, etc.
- for fixing and sealing joints of roofs, walls and ceilings
Technical data:
- Quick setting, gun mounting foam
- It is a polyurethane foam, single component
- Does not contain CFCs - hygrocurable
- Flammability class of the foam: B3
- Insulates both thermally and acoustically
- Quick-drying - full hardness occurs after 24 hours
- Does not age after protection
- Usable temperature: from -10 deg C (ambient temp.) and +15 deg C (container temp.)
- Can be processed after 45 minutes at 20 deg C
- Temperature resistant from - 50 deg C to + 90 deg C (after complete curing)
- Vapor and water resistant
- Minimum capacity is 40 liters at 20 deg C
You might also like
