Piana Pistoletowa 750ml niskoprążna ECO Stalco

Product description

It is a low-pressure assembly foam with a short skin formation time. STALCO assembly foam in a hose version is a product with excellent insulation properties, high viscosity and adhesion. Accurate dosage allows for economical use.The special formula allows for its universal application. It is designed to fill and seal assembly gaps, holes and cracks. It also works well for thermal and acoustic insulation of buildings and ventilation and air conditioning equipment, protects against noise. It can also be used to seal the space between the masonry and installed door and window frames, as well as for the installation and insulation of wiring. A great advantage is its excellent adhesion to most building materials such as concrete, brick, plaster, wood, pvc, etc.

Directions for use:

Clean the substrate from dust, dirt and grease. Strip the door frames before applying the foam. Protect the woodwork with foil or adhesive tape. Container temperature: 10°C to 35°C (optimally 20°C). Immediately before use, shake the container vigorously about 20-30 times. Screw the can onto the gun. Working position of the container - with the valve downwards. Moisten the substrate generously with water. Fill the gaps no wider than 5 cm at 50% of their depth - the foam increases in volume during curing. Fill gaps wider than 5 cm gradually in layers, and moisten each layer with water. The foam flow can be adjusted by pressure on the trigger of the gun. After curing, remove excess foam mechanically, such as with a knife. It is best to use up the started package to the end. Fresh dirt from the foam can be removed with acetone. The cured foam should be protected and shielded with paint, plaster or other UV-protective materials. After finishing the work, clean the gun with a polyurethane foam cleaner.

Technical data:

• Capacity: 750ml
• Applicator: pistol
• K-factor: 0.03 W/mk
• Pre-treatment time: 60 min.
• Full curing time: 24h
• Thermal resistance: from -50°C to +90°C
• Storage/working temperature: up to -10°C to +30°C
• Capacity: up to 45 liters (depending on temperature and humidity)